Sweeping robots

in the face of tedious daily chores, we always have to spend a lot of energy to ensure that the interior is clean and tidy, sweeping and mopping the floor is one of the common chores, which makes many families troubled. sweeping robot is one of the products of modern science and technology electronic intelligence, can automatically clean the indoor floor cleaning in a short period of time, with its automatic cleaning and convenient and fast functional characteristics, the popularity of families at home and abroad is also getting higher and higher.

as the dark horse in smart home appliances, the sweeping robot has a powerful “internal organ system” to support, including many silicone parts installed on various parts, previously, we collected the application scheme of dongcheng silicone on a sweeping robot, in order to analyze why silicone parts will become an indispensable product element of the sweeping robot…

• the face cover and fuselage are the skeleton of the machine; most of the sweeping robots on the market use a circular structure, this machine is no exception, carrying some sensors, information receivers and other small parts; acting as a protective cover externally, therefore, dongcheng silicone parts in the cover and fuselage easy to collide with the outside world where it can produce a certain cushioning and anti-collision effect, as shown in the following figure, silicone strip spreads in a large area of buffer zone.

• waterproof essentials: the three major silicone parts of the water storage tank; the sweeping robot with two-in-one function will be equipped with a water storage tank itself, and the water tank of the sweeping robot has three places that use the elasticity of silicone, thereby helping the chassis to achieve the effect of waterproof sealing; the silicone plug at the water inlet, and the silicone ring on the cover mouth, are to ensure the sealing effect of the water tank mouth and prevent water leakage. the water tank is equipped with a layer of silicone sealing ring on the periphery of the built-in power generation group, which is intended to isolate the battery pack from the clean water and ensure safety performance.
  

• The fan assembly is the ash inlet of the machine; when the sweeping robot works, the fan assembly uses the motor suction to suck the dust into the inner box, and the main power to clean the dust comes from here. Ground dust first enters from the suction port of the white component, the black silicone ring structure at the edge is clearly layered, in addition to helping the casing to improve the dustproof performance, it can produce an anti-collision buffer effect; ES Dongcheng on this part of the white and black components of the intersection of the same preferential elastic silicone ring, when the motor starts, there is enough tightness to ensure the stability of the structure; three round hole silicone rings are located in the part of the screw nesting, in order to ensure that the fan operates when the shockproof effect.
  

• The charging seat undertakes the endurance of the machine; the charging seat is an important configuration system of the sweeping robot, from the “departure” of the sweeping robot to the “triumphant return”, the charging seat always sticks to the spot and is ready for action. Silicone foot pads are no stranger to every product, Dongcheng silicone pads are widely used in various fields, this charging cradle silicone pad is particularly prominent in wear resistance, anti-slip and cushioning effect.
  
• The above pictures are real shooting materials, ES Dongcheng has more than ten years of silicone products / silicone sealing rings and other production customization experience, can help products up to IP68 waterproof and dustproof grade, in the sealing, elasticity and anti-slip and anti-collision performance has outstanding advantages; understand and consult more about the application of silicone parts in sweeping robots and other products, Feel free to contact us.