Home Custom ProductsProtective Covers Silicone Cases

INGENICO-MOVE2500 POS Terminal Silicone Protective Case

INGENICO-MOVE2500 POS Terminal Silicone Protective Case

Most protective case failures on handheld payment terminals start with the same mistake: designing the case first and checking the fit later. ES Silicone is a mold-making and custom manufacturing partner based in Shenzhen, and this page presents a brand-customer customization reference for the INGENICO-MOVE2500 POS terminal—this case is not available for sample purchase. The MOVE2500 is a handheld terminal that is gripped, carried, and occasionally dropped, so the case was designed around three fixed points: the terminal's contour, the user's grip, and the cable ports. Wall thickness was verified before tooling, the anti-slip texture was engraved directly into the mold cavity, and the silicone compound was formulated with UV stabilizers and anti-aging additives to resist yellowing and hardening. All tooling, molding, and inspection were completed in-house.

Key Features

Grip-First Mold Design for One-Handed Handheld Use
Anti-Slip Texture Engraved Into the Mold Cavity
Washable and Disinfectable Silicone Compound
UV-Stabilized Silicone Compound for Appearance Retention
Precision Fit for INGENICO-MOVE2500 Terminal
Full In-House Tooling, Molding, and Inspection

Send Inquiry

Product Description

Product Overview

The INGENICO-MOVE2500 is designed to leave the counter. It gets carried between tables, handed across service counters, and occasionally dropped. That changes what a protective case needs to do. A case that fits loosely will shift in the hand during one-handed operation. A case that fits too tightly will interfere with charging contacts or card slot access. And a case that only looks durable will show its limits the first time the terminal hits the floor.

We approached the MOVE2500 by mapping its contours, grip zones, and interface openings before any mold was cut. Wall thickness was verified at the corners and base where drop impact concentrates, while the sides were kept slim to maintain a secure grip. The anti-slip texture was engraved into the mold cavity rather than applied as a coating, so traction does not wear away at contact points. The silicone compound was tuned with UV stabilizers and anti-aging additives to resist yellowing and surface hardening under prolonged light exposure. The material itself is non-toxic, odorless, washable, and suitable for repeated disinfection—properties that matter for terminals used in food service and healthcare environments. This is a brand-customer customization case, not a product for sample sale. Brands developing similar protective solutions can begin with a validation batch of 100 pieces, with all tooling, molding, and inspection completed in-house.

Core Advantages

1. Grip-First Mold Design for Handheld Terminals ： The MOVE2500 is operated with one hand while moving, so grip security drives the mold design. Side wall thickness is kept slim to maintain hand contact, while corner thickness is verified separately to absorb drop impact.

2. Anti-Slip Texture Engraved Into the Mold Cavity ： Grip patterns are cut directly into the mold rather than applied as a coating. This keeps traction consistent across the case surface and avoids the peeling or smoothing that affects coated alternatives.

3.Washable, Disinfectable Material for Hygiene-Sensitive Use ： The silicone compound is non-toxic, odorless, and compatible with repeated cleaning and disinfection, making it suitable for food service, hospitality, and healthcare environments where terminals are shared.

Application & Custom Service

1.Industry Compatibility:

Retail & Payment : POS terminals in stores, supermarkets, hotels, and restaurants requiring device protection

Logistics & Delivery ： Handheld POS devices used in field operations, delivery services, and mobile payment scenarios

Unattended & Self-Service : Kiosk terminals, self-checkout devices, and automated payment stations

2.Core Product Application Scenarios:

Retail Store POS Terminals for Daily Handling ： Anti-slip silicone case protects devices from drops and impacts during busy checkout operations, with moderate grip reducing handling fatigue for cashiers

Mobile POS Devices for Delivery and Field Use : Durable protective case shields terminals from bumps, scratches, and environmental exposure during outdoor operations

Multi-Location Deployments with Cable Connections ： Unobstructed cable port access allows the case to remain in place during maintenance or peripheral changes

Customization & Ordering Information

1.Fully Customized Products: All ES Silicone products are custom-made based on customer requirements.

2.MOQ Requirements: MOQ varies by product category, structure, and production requirements. Typically, orders start from 100 pieces.

3.Prototype & Mass Production: We support prototype validation before mass production. Reasonable prototype fees apply and may be credited for qualified projects.

4.Engineering Support: Our engineering team provides DFM evaluation to optimize product feasibility and ensure stable production.

5.More Project Cases: Website examples represent selected non-confidential projects. Contact us for more customized applications and solutions.

6.Learn More About ES Silicone: Discover our capabilities and workflow through Who We Are and How We Work.

Hot Tags: INGENICO-MOVE2500 POS Terminal Silicone Protective Case, INGENICO-MOVE2500 Silicone Case, POS Terminal Protective Case, Custom Silicone Protective Cover, Anti-Slip POS Case, Anti-Aging Silicone Sleeve, Silicone Protective Sleeve, POS Terminal Cover, ES Silicone Protective Case, Durable POS Case, Retail POS Accessory

AMP-8000 POS Terminal Silicone Protective Case

This premium silicone protective case is a brand-customer customization case study manufactured by Shenzhen ES Electronic Co., Ltd. for the AMP-8000 POS terminal. As a professional custom molding manufacturer, ES Silicone does not sell this product as a sample—images are for case demonstration only. We provide end-to-end customization services from DFM analysis and mold design to precision compression molding, surface texturing, and mass production. The case achieves burr-free edges with tight dimensional tolerances, ensuring a perfect fit that does not interfere with terminal operation.

AMP-8200 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the AMP-8200 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project was built around three priorities: a precise fit, a surface that stays clean and grippy in daily counter use, and a material that will not discolor or harden over time. Every stage—DFM review, tooling, molding, texturing, and final inspection—was handled in-house to keep tolerances and appearance consistent from the first trial run to volume production.

AMP-9000 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the AMP-9000 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project prioritized three things: a fit that follows the terminal's exact geometry, a grip surface that stays effective after months of counter use, and a silicone compound that resists discoloration and hardening. DFM review, tooling, molding, texturing, and inspection were all completed in-house to keep quality consistent from the first trial run through volume production.

CENTERM-K9 POS Terminal Silicone Protective Case

This protective case was developed for the CENTERM-K9 POS terminal as a brand-customer customization project by Shenzhen ES Electronic Co., Ltd. ES Silicone is a custom molding manufacturer, not a product retailer—this case is shown as a reference project and is not available for sample purchase. The case is produced with in-house tooling that delivers burr-free edges and precise dimensional tolerances, ensuring it fits the terminal securely without obstructing any ports or buttons. A custom anti-slip texture is built directly into the mold surface, providing a stable grip for daily counter use. The silicone compound is formulated with UV stabilizers and anti-aging additives, so the case resists yellowing and hardening over time, even under sunlight and frequent handling.

DATECS-BP5000 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the DATECS-BP5000 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project focused on three requirements: a fit that follows the terminal's exact contours, a grip surface that remains effective after repeated handling, and a silicone compound that resists discoloration and hardening. DFM review, tooling, molding, texturing, and inspection were all completed in-house to keep quality consistent from the first trial run through volume production.

DSPREAD-A29 POS Terminal Silicone Protective Case

This is a brand-customer customization case developed for the DSPREAD-A29 POS terminal by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner—this case is not available for sample purchase. The project was driven by a simple question: how do you make a protective sleeve that looks integrated with the terminal rather than added onto it? We handled the full development cycle in-house, from interface mapping and mold design to texturing, molding, and inspection, so the delivered parts matched the approved samples without variation between trial and volume runs.

DSPREAD-A30 POS Terminal Silicone Protective Case

Three everyday actions define whether a receipt-printing terminal's case survives in daily use: changing the paper roll, returning the device to its charging dock, and plugging in a cable. If any one of those becomes harder because of the case, staff will remove it. ES Silicone is a mold-making and custom manufacturing partner based in Shenzhen, and this page presents a brand-customer customization reference for the DSPREAD-A30 POS terminal—this case is not available for sample purchase. Each of those three actions was mapped before tooling began, so the finished case supports them instead of obstructing them. All molding and inspection were completed in-house.

Tell Us About Your Project

Share your requirements - we’ll provide practical solutions, engineering support, and samples.