Home Custom ProductsProtective Covers Silicone Cases

Silicone Protective Cover for Fascia Gun

Silicone Protective Cover for Fascia Gun

Many fascia gun covers are made from solid silicone and feel acceptable on the first day. The difference shows up later, when the surface collects dust or the grip turns slick from sweat and repeated handling. ES Silicone is a mold-making and custom manufacturing partner based in Shenzhen, and this page presents a brand-customer customization reference for a fascia gun protective cover—this cover is not available for sample purchase. The cover is molded from food-grade liquid silicone and finished with a spray-on hand-feel oil process that produces a fine, non-slip texture. Anti-static treatment reduces dust adhesion. All tooling, molding, and inspection were completed in-house.

Key Features

Food-Grade Liquid Silicone for Skin-Safe Contact
Spray-On Hand-Feel Oil for Dry, Non-Slip Texture
Anti-Static Formulation to Reduce Dust Adhesion
Thin-Wall Design Preserves Original Device Dimensions
Precision Fit for Fascia Gun Housings
Full In-House Tooling, Molding, and Inspection

Send Inquiry

Product Description

Product Overview

A fascia gun is held during use and set down between sessions, which means its cover has to handle both grip and surface cleanliness. Standard solid silicone covers often fail on one of these two points. Without surface treatment, the material feels tacky and attracts dust. With a heavy coating, the surface feels slick once sweat or oil reaches it. Neither outcome works well for a device that is gripped with force during use.

For this project, we started with the material rather than the coating. Food-grade liquid silicone was selected for its skin-safe formulation and consistent surface quality. A spray-on hand-feel oil process was then applied to create a fine, dry-touch texture that holds grip without feeling rubbery. Anti-static additives were integrated into the formulation to reduce dust adhesion, which addresses the most common complaint about silicone covers in this category. Mold design focused on keeping the wall thin enough to preserve the device's original dimensions while protecting the corners and motor housing. This is a brand-customer customization case, not a product for sample sale. Brands developing similar protective covers can begin with a validation batch of 100 pieces, with all tooling, molding, and inspection completed in-house.

Core Advantages

1. Food-Grade Liquid Silicone for Skin-Safe Contact : The cover is molded from food-grade liquid silicone rather than a standard solid compound, providing a skin-safe formulation suited to devices held against the body during use.

2. Spray-On Hand-Feel Oil for Dry, Non-Slip Texture : The surface treatment produces a fine, dry-touch finish instead of a tacky or rubbery feel. Grip is maintained even when the device is held with force during use.

3. Anti-Static Formulation to Reduce Dust Adhesion : Anti-static additives are integrated into the compound, addressing the most common complaint about silicone covers in this product category—surface dust and lint.

Application & Custom Service

1.Industry Compatibility:

Fitness & Recovery Equipment : Fascia guns, massage devices, and handheld recovery tools requiring protective covers with secure grip

Consumer Electronics : Handheld devices with motor housings where drop protection and surface grip matter

Sports & Wellness Products : Personal care devices used during workouts or physical therapy sessions

2.Core Product Application Scenarios:

Home Fitness Fascia Guns for Daily Recovery : Dry-touch surface maintains grip during use, while anti-static treatment keeps the cover presentable between sessions

Gym and Studio Devices for Shared Use : Food-grade silicone and spray-on hand-feel oil support frequent handling and wipe-down cleaning

Brand-Customized Recovery Device Programs : Custom color and logo options allow the cover to carry brand identity without affecting grip or surface feel

Customization & Ordering Information

1.Fully Customized Products: All ES Silicone products are custom-made based on customer requirements.

2.MOQ Requirements: MOQ varies by product category, structure, and production requirements. Typically, orders start from 100 pieces.

3.Prototype & Mass Production: We support prototype validation before mass production. Reasonable prototype fees apply and may be credited for qualified projects.

4.Engineering Support: Our engineering team provides DFM evaluation to optimize product feasibility and ensure stable production.

5.More Project Cases: Website examples represent selected non-confidential projects. Contact us for more customized applications and solutions.

6.Learn More About ES Silicone: Discover our capabilities and workflow through Who We Are and How We Work.

Metallic Silicone Keypad for High-Security PIN Entry

Hot Tags: Silicone Protective Cover for Fascia Gun, Silicone Protective Cover for Fascia Gun, Fascia Gun Silicone Case, Food-Grade Silicone Cover, Anti-Static Silicone Sleeve, Custom Silicone Cover, Hand-Feel Oil Coating, Non-Slip Silicone Cover, ES Silicone Protective Case, Recovery Device Silicone Cover, OEM Silicone Accessory

AMP-8000 POS Terminal Silicone Protective Case

This premium silicone protective case is a brand-customer customization case study manufactured by Shenzhen ES Electronic Co., Ltd. for the AMP-8000 POS terminal. As a professional custom molding manufacturer, ES Silicone does not sell this product as a sample—images are for case demonstration only. We provide end-to-end customization services from DFM analysis and mold design to precision compression molding, surface texturing, and mass production. The case achieves burr-free edges with tight dimensional tolerances, ensuring a perfect fit that does not interfere with terminal operation.

AMP-8200 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the AMP-8200 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project was built around three priorities: a precise fit, a surface that stays clean and grippy in daily counter use, and a material that will not discolor or harden over time. Every stage—DFM review, tooling, molding, texturing, and final inspection—was handled in-house to keep tolerances and appearance consistent from the first trial run to volume production.

AMP-9000 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the AMP-9000 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project prioritized three things: a fit that follows the terminal's exact geometry, a grip surface that stays effective after months of counter use, and a silicone compound that resists discoloration and hardening. DFM review, tooling, molding, texturing, and inspection were all completed in-house to keep quality consistent from the first trial run through volume production.

CENTERM-K9 POS Terminal Silicone Protective Case

This protective case was developed for the CENTERM-K9 POS terminal as a brand-customer customization project by Shenzhen ES Electronic Co., Ltd. ES Silicone is a custom molding manufacturer, not a product retailer—this case is shown as a reference project and is not available for sample purchase. The case is produced with in-house tooling that delivers burr-free edges and precise dimensional tolerances, ensuring it fits the terminal securely without obstructing any ports or buttons. A custom anti-slip texture is built directly into the mold surface, providing a stable grip for daily counter use. The silicone compound is formulated with UV stabilizers and anti-aging additives, so the case resists yellowing and hardening over time, even under sunlight and frequent handling.

DATECS-BP5000 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the DATECS-BP5000 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project focused on three requirements: a fit that follows the terminal's exact contours, a grip surface that remains effective after repeated handling, and a silicone compound that resists discoloration and hardening. DFM review, tooling, molding, texturing, and inspection were all completed in-house to keep quality consistent from the first trial run through volume production.

DSPREAD-A29 POS Terminal Silicone Protective Case

This is a brand-customer customization case developed for the DSPREAD-A29 POS terminal by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner—this case is not available for sample purchase. The project was driven by a simple question: how do you make a protective sleeve that looks integrated with the terminal rather than added onto it? We handled the full development cycle in-house, from interface mapping and mold design to texturing, molding, and inspection, so the delivered parts matched the approved samples without variation between trial and volume runs.

DSPREAD-A30 POS Terminal Silicone Protective Case

Three everyday actions define whether a receipt-printing terminal's case survives in daily use: changing the paper roll, returning the device to its charging dock, and plugging in a cable. If any one of those becomes harder because of the case, staff will remove it. ES Silicone is a mold-making and custom manufacturing partner based in Shenzhen, and this page presents a brand-customer customization reference for the DSPREAD-A30 POS terminal—this case is not available for sample purchase. Each of those three actions was mapped before tooling began, so the finished case supports them instead of obstructing them. All molding and inspection were completed in-house.

Tell Us About Your Project

Share your requirements - we’ll provide practical solutions, engineering support, and samples.