Home Custom ProductsProtective Covers Silicone Cases

TELPO-TPS900P POS Terminal Silicone Protective Case

TELPO-TPS900P POS Terminal Silicone Protective Case

A protective case holds its shape because of the material behind it, not the drawing of it. ES Silicone is a mold-making and custom manufacturing partner based in Shenzhen, and this page presents a brand-customer customization reference for the TELPO-TPS900P POS terminal—this case is not available for sample purchase. The compound used here is a polymer silicone formulated for low shrinkage and high tear strength, so the molded case keeps its dimensions and does not split at thin sections over time. It is odorless at room temperature and non-toxic in contact use. All tooling, molding, and inspection were completed in-house.

Key Features

Low-Shrinkage Polymer Silicone for Dimensional Stability
Improved Tear Strength at Thin Sections
Thermal Stability Across Temperature Variation
Non-Toxic and Odorless for Contact Use
Precision Fit for TELPO-TPS900P Terminal
Full In-House Tooling, Molding, and Inspection

Send Inquiry

Product Description

Product Overview

Two cases can share the same shape and still perform differently after a year. The difference usually comes down to shrinkage and tear strength—two material properties that rarely appear in product descriptions but determine whether a case still fits the terminal after months of use. A compound with high shrinkage will pull away from the intended dimensions as it cures. A compound with low tear strength will split at the corners or around port openings under repeated stress.

For the TELPO-TPS900P, we selected a polymer silicone compound formulated for dimensional stability and improved rebound. Shrinkage is kept low so the molded part matches the mold, and tear strength is raised so thin sections hold up under handling. The material is non-toxic, odorless at room temperature, and thermally stable, which matters for terminals that sit near heat sources or in enclosed cabinets. The anti-slip texture was engraved directly into the mold cavity. This is a brand-customer customization case, not a product for sample sale. Brands developing similar protective solutions can begin with a validation batch of 100 pieces, with all tooling, molding, and inspection completed in-house.

Core Advantages

1. Low-Shrinkage Compound for Dimensional Stability : The polymer silicone formulation is selected to minimize shrinkage during curing, so the molded case matches the mold dimensions and fits the terminal consistently rather than loosening over time.

2. Improved Tear Strength at Thin Sections : Tear strength is raised compared to standard compounds, so corners, port openings, and other thin areas resist splitting under repeated handling and installation.

3. Thermal Stability for Enclosed or Heat-Adjacent Installations : The material maintains its properties across temperature variation, which matters for terminals placed near kitchen equipment, under counters, or in enclosed cabinets.

Application & Custom Service

1.Industry Compatibility:

Retail & Payment : POS terminals in stores, supermarkets, hotels, and restaurants requiring device protection

Logistics & Delivery ： Handheld POS devices used in field operations, delivery services, and mobile payment scenarios

Unattended & Self-Service : Kiosk terminals, self-checkout devices, and automated payment stations

2.Core Product Application Scenarios:

Shared Public Terminals : Non-toxic, contact-safe compound supports use in environments where many different people handle the device daily

High-Touch Checkout Counters : Shape-retentive material holds the case's form through months of daily handling without sagging at the corners

Long-Deployment Fleets Across Locations : Anti-aging additives slow visible color shift so replacement cases match existing units over time

Customization & Ordering Information

1.Fully Customized Products: All ES Silicone products are custom-made based on customer requirements.

2.MOQ Requirements: MOQ varies by product category, structure, and production requirements. Typically, orders start from 100 pieces.

3.Prototype & Mass Production: We support prototype validation before mass production. Reasonable prototype fees apply and may be credited for qualified projects.

4.Engineering Support: Our engineering team provides DFM evaluation to optimize product feasibility and ensure stable production.

5.More Project Cases: Website examples represent selected non-confidential projects. Contact us for more customized applications and solutions.

6.Learn More About ES Silicone: Discover our capabilities and workflow through Who We Are and How We Work.

Hot Tags: TELPO-TPS900P POS Terminal Silicone Protective Case, TELPO-TPS900P Silicone Case, POS Terminal Protective Case, Custom Silicone Protective Cover, Low-Shrinkage Silicone Sleeve, Anti-Aging Silicone Sleeve, Silicone Protective Sleeve, POS Terminal Cover, ES Silicone Protective Case, Durable POS Case, Retail POS Accessory

AMP-8000 POS Terminal Silicone Protective Case

This premium silicone protective case is a brand-customer customization case study manufactured by Shenzhen ES Electronic Co., Ltd. for the AMP-8000 POS terminal. As a professional custom molding manufacturer, ES Silicone does not sell this product as a sample—images are for case demonstration only. We provide end-to-end customization services from DFM analysis and mold design to precision compression molding, surface texturing, and mass production. The case achieves burr-free edges with tight dimensional tolerances, ensuring a perfect fit that does not interfere with terminal operation.

AMP-8200 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the AMP-8200 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project was built around three priorities: a precise fit, a surface that stays clean and grippy in daily counter use, and a material that will not discolor or harden over time. Every stage—DFM review, tooling, molding, texturing, and final inspection—was handled in-house to keep tolerances and appearance consistent from the first trial run to volume production.

AMP-9000 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the AMP-9000 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project prioritized three things: a fit that follows the terminal's exact geometry, a grip surface that stays effective after months of counter use, and a silicone compound that resists discoloration and hardening. DFM review, tooling, molding, texturing, and inspection were all completed in-house to keep quality consistent from the first trial run through volume production.

CENTERM-K9 POS Terminal Silicone Protective Case

This protective case was developed for the CENTERM-K9 POS terminal as a brand-customer customization project by Shenzhen ES Electronic Co., Ltd. ES Silicone is a custom molding manufacturer, not a product retailer—this case is shown as a reference project and is not available for sample purchase. The case is produced with in-house tooling that delivers burr-free edges and precise dimensional tolerances, ensuring it fits the terminal securely without obstructing any ports or buttons. A custom anti-slip texture is built directly into the mold surface, providing a stable grip for daily counter use. The silicone compound is formulated with UV stabilizers and anti-aging additives, so the case resists yellowing and hardening over time, even under sunlight and frequent handling.

DATECS-BP5000 POS Terminal Silicone Protective Case

This case is a brand-customer customization reference for the DATECS-BP5000 POS terminal, produced by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner, not a retail supplier—this item is not sold as a sample. The project focused on three requirements: a fit that follows the terminal's exact contours, a grip surface that remains effective after repeated handling, and a silicone compound that resists discoloration and hardening. DFM review, tooling, molding, texturing, and inspection were all completed in-house to keep quality consistent from the first trial run through volume production.

DSPREAD-A29 POS Terminal Silicone Protective Case

This is a brand-customer customization case developed for the DSPREAD-A29 POS terminal by Shenzhen ES Electronic Co., Ltd. ES Silicone is a mold-making and custom manufacturing partner—this case is not available for sample purchase. The project was driven by a simple question: how do you make a protective sleeve that looks integrated with the terminal rather than added onto it? We handled the full development cycle in-house, from interface mapping and mold design to texturing, molding, and inspection, so the delivered parts matched the approved samples without variation between trial and volume runs.

DSPREAD-A30 POS Terminal Silicone Protective Case

Three everyday actions define whether a receipt-printing terminal's case survives in daily use: changing the paper roll, returning the device to its charging dock, and plugging in a cable. If any one of those becomes harder because of the case, staff will remove it. ES Silicone is a mold-making and custom manufacturing partner based in Shenzhen, and this page presents a brand-customer customization reference for the DSPREAD-A30 POS terminal—this case is not available for sample purchase. Each of those three actions was mapped before tooling began, so the finished case supports them instead of obstructing them. All molding and inspection were completed in-house.

Tell Us About Your Project

Share your requirements - we’ll provide practical solutions, engineering support, and samples.